Mopar 82211870 Instrucciones De Montaje página 4

4
WIRE HARNESS INSTALLATION
1. Release the Totally Integrated Power Module (TIPM)
cover retaining clips (1) and open the TIPM cover.
2. Remove the TIPM positive cable retaining nut (2) and
remove the cable (4) from the stud.
3. Position the TIPM back to gain access to the "D" con­
nector (1) under the TIPM.
4. Disconnect the "D" connector (1).
Oct 24, 2008 K6860678 Rev. 1