Mopar 82211870 Instrucciones De Montaje página 8

8
UPDATE VEHICLE CONFIGURATION
1. VIN must be updated with the sales code of the added accessory in order to enable system functionality. Using the
DealerCONNECT website and a StarMobile diagnostic tool, complete the vehicle configuration.
2. Log on to https://dealerconnect.chrysler.com
3. In the "Vehicle Option" screen under the "Global Claims System" category in the "Service" tab, enter vehicle VIN and
add sales code(s) noted below as a "Dealer Installed Option".
LNJ (Fog Lamps)
4. Confirm that the new sales code has been successfully added to the VIN.
5. With the StarMobile diagnostic tool connected to both the internet (via Ethernet port or wireless connection) and the
vehicle, perform the following steps from the Initial Start Up Screen:
• Select "VEHICLE PREPARATION"
• Select "RESTORE VEHICLE CONFIGURATION"
• Select "START"
• Select "NEXT"
• If necessary, select proper vehicle line and model year and select "NEXT"
• Confirm correct selection and select "NEXT"
• Enter vehicle VIN using On­Screen keyboard or confirm that auto­filled VIN plate and select "NEXT"
• Select "OK"
• Enter user ID, password and dealer code using On­Screen keyboard and Select "OK"
• Wait for vehicle configuration data to be downloaded and select "NEXT"
• Select "NEXT"
• Confirm that vehicle configuration has been programmed successfully
• Note On­Screen instructions and select "FINISH"
VALIDATION PROCESS
1. To validate that the fog lamps are activated in the system:
• Select "ECU VIEW"
• Select "TIPM/CGW"
• Select "MORE OPTIONS"
• Select "ECU DETAILS"
• Select "CONFIG INFO"
• Toggle down, verify:
NAME
FOG LAMPS PRESENT
Oct 24, 2008
VALUE
SET
K6860678 Rev. 1