Name and Function of Parts
ODS-L30M
Front panel
Note
The front panel of the ODS-L30M can be removed and
interchanged with the front panels of ODS-L60E/L100E
extension units. The ODS-L30M will be installed at the
bottom of a stack of multiple units, but its front panel may
be placed onto an extension unit whose height allows for
easier operation.
a On/standby button and indicator
Switches the unit between on and standby mode when the
main power switches on the rear are turned on. Press the
button when it is on to switch to standby mode. A
shutdown confirmation message appears on the display.
Use the arrow button to select "Yes," and then press the
ENTER button.
The indicator lights green when the unit is on and red when
the unit is in standby mode. The indicator blinks green
when the unit is shutting down.
Notes
• If the button is pressed while there is a cartridge in a
drive, a confirmation message appears on the display.
Eject the cartridge from the drive before proceeding.
• Exit all connected applications before shutting down the
unit. Shutting down turns off the drive power supply, and
any data currently being recorded will be lost.
38
Name and Function of Parts
b Display
Displays the unit's status, setting menus, messages, etc.
c ALARM indicator
Blinks when errors or warnings occur.
Blinking red: Error
Blinking orange: Warning
d MENU button
Displays a menu in the display when pressed.
e Arrow buttons
Scrolls through menus in the display and sets input values.
f ENTER button
Moves to the next page or confirms input values during
menu operations.
g BACK button
Moves to the previous page or cancels input values during
menu operations.
h I/E STATION button and indicator
Releases the I/E station's lock. The lock can be released
when the indicator is lit green or orange. The indicator
starts blinking orange when the lock is released.
If the I/E station is not opened within ten seconds after
releasing the lock, the I/E station is automatically relocked.