Displaying The Web Screen - Sony ODS-L30M Manual De Instrucciones

Note
To obtain the DNS address automatically, select
[Auto]. Confirm the setting using the same method as
you would with [Static], and proceed to step 24.
19
Press the ENTER button.
The [IPv4 Primary DNS] screen appears.
20
Press the ENTER button.
The first digit of the IP address blinks, indicating that
it can be changed.
21
Use the K, k, J, and j buttons to enter the primary
DNS address, and press the ENTER button.
22
Press the j button.
The [IPv4 Secondary DNS] screen appears.
23
Enter the secondary DNS address using the same
method as step 20, and press the ENTER button.
24
Press the j button.
The following confirmation screen appears.
25
Check that [Save] is selected, and press the ENTER
button.
The changed IP address is enabled.
The [Network1] screen appears again.
26
Press the BACK button three times to end menu
operation.
IP addresses can also be changed in the Web screen
(Library Maintenance Web UI).
For details on changes using the Library Maintenance
Web UI, refer to the Library Maintenance Web UI
Help.

Displaying the Web Screen

A web screen (Library Maintenance Web UI) can be used
to perform setting operations for this unit.
Recommended environment
Web browser:
• For Windows: Google Chrome (latest version) or
Microsoft Internet Explorer 11
• For Mac OS: Google Chrome (latest version)
• Monitor size: 1,024 pixels or wider
To display the web screen, enter the URL
https://(ip_address)/ into a web browser.
Example: https://192.168.1.10/
When connecting to the unit from a web browser, a "The
site's security certificate is not trusted!" or similar message
appears. Check that the IP address displayed in the
message is correct before proceeding.
Next, the authentication screen appears. Enter the
following user name and password.
User: admin, Password: ods-l30m
After authentication, the Library Maintenance Web UI
screen appears.
For details on Library Maintenance Web UI operations,
refer to the Library Maintenance Web UI Help.
Notes
• Consult your network administrator about the required
network settings.
PCs may not connect to the unit on a network, depending
on the browser proxy server settings.
• Only one web client can be connected to the unit at any
one time.
• The web screen supports up to three simultaneous
connections (http sessions). If two or more sessions are
open at the same time, an error occurs if the registration
operations conflict with one another. In such cases, the
operation should be issued a second time.
• The library does not perform network routing. To obtain
a gateway address and an IP address automatically,
configure settings for a single network only.
• Enables JavaScript in your web browser. The login
screen is not displayed if JavaScript is not enabled.
• Set your web browser to accept cookies. You will not be
able to log in unless you allow your browser to accept
cookies from the unit.
49
Configuring the Network