Rowenta SILENCE FORCE CYCLONIC Manual Del Usuario página 13

2 • Plugging in the power cord
and using the vacuum cleaner
Unwind the power cord completely, plug in your
vacuum cleaner and press the ON/OFF button
(fig.10)
.
• djust the vacuuming power using the power
switch on the power nozzle
• Position (MIN) for vacuuming delicate fabrics
(net curtains, textiles).
• Position (Medium) for every day vacuuming of
all types of floors, that are only slightly dirty.
• Position (M X) for vacuuming hard floors and
rugs and carpets that are really dirty.
IMPORT NT
Do not operate your vacuum
cleaner without the filtration system fitted (3 and 5).
IMPORT NT
Do not use the vacuum cleaner
once the maximum level is reached I the dust
container.
CLE NING ND M INTEN NCE
The air we breathe contains particles that may be
allergens: mite larvae and droppings, mould, pollen,
smoke and animal residues (hair, skin, saliva, urine).
The smallest particles penetrate deep into the
respiratory system where they can cause
inflammation and cause lung impairment.
HEPA filters (High Efficiency Particulate Air) are used
to filter out the smallest particles.
With the HEPA filter, the air released back into the
room is healthier than the air that is vacuumed.
IMPORT NT
lways switch off and unplug
your vacuum cleaner before cleaning or
servicing.
1 • If you have the mechanical
model*: mechanical cleaning
of the HEP filter
and emptying of the dust
container
Each time after use, we recommend that you
clean the HEP filter to maintain optimum suction
power.
*Depending on model:
this is either equipment specific to certain models or available as an optional accessory.
(fig.11)
:
14
3 • Storage and transport of
the appliance
fter use, switch off your vacuum cleaner by
pressing the ON/OFF button and unplug it
(fig.12)
. Rewind the power cord by pressing the
power cord rewind button
Use the carrying power nozzle to carry your
vacuum cleaner easily
IMPORT NT
Do not use the power nozzle
of the dust container to carry the appliance
(fig.15)
.
When storing your vacuum cleaner, you can park
it either vertically or horizontally
the tube in the storage slot underneath or at the
back of the appliance, in the parking position
(fig.17)
.
The HEP filter is cleaned using the cleaning knob (6).
fter use, switch off your vacuum cleaner, unplug it
and open the cover by pressing the "OPEN" button
(fig.18)
, remove the bowl
HEP filter cleaning knob by turning it in a
(fig.20)
clockwise direction
filter assembly (3 and 5)
gently against the side of the bowl to remove any
(fig.23)
excess dust
(fig.24)
container . Clean the separator the cover
using a cloth if it is dirty
assembly (3 and 5) back inside the dust container
(fig.26)
. Then fit the dust container back into its
housing and close the vacuum cleaner cover
(fig.27)
.
IMPORT NT
Each time after use, we
recommend that you turn the HEP
cleaning knob 6 times completely, so that your
vacuum cleaner maintains full suction power.
EN
(fig.13)
.
(fig.14)
.
(fig.16)
. Place
(fig.19)
, actuate the
, then remove the
(fig.22)
, tapping it
then empty the dust
(fig.25)
. Put the filter
filter