Product Description - Bertolini C 300 Serie Manual De Usuario

Bertolini high-pressure piston pumps are designed to be used with clean water, with a tem-
perature of up 60°C.
If you pump corrosive additives with higher temperature please consult the
Service"
.
The pump operation must comply with the specifications indicated on the label (fig. 1); remov-
ing label implies the loss of any warranty.
Upon receipt of the pump, check the label is similar to the one illustrated below.
The following data are indicated on the label:
9. Max. admissible pressure (bar)
10. Max. admissible pressure (P.S.I.)
11. Pump model
12. Flow rate (l/min)
13. Flow rate (G.P.M.)
14. Serial number
15. Required power (KW)
16. Speed
The Max. admissible pressure and the Max. speed indicated on the label cannot be
exceeded.
1
If the identification label is damaged by use, please contact the seller or an authorized
Customer Service for its replacement.

22- PRODUCT DESCRIPTION

3
2
8
4
37
"Bertolini Technical
6
7
5