Alber E-Motion ECD Manual Del Usuario página 43

The code can be found on a sticker on
the edge of the wheel hub (see photo).
Depending on the position of the drive
wheel, it may be necessary to turn the
e-motion drive wheel slightly in order to
conveniently scan the code from above.
- If the scanning process of both codes
was successful, you will now be asked to
enter a PIN of your choice with a mini-
mum of four and a maximum of 10 digits. Repeat the PIN after-
wards to ensure that it has been entered correctly and note this
PIN for future reference. In future, the PIN will be required to start
the app.
- If you have forgotten your PIN, you can reset it at any time via the
menu item „Settings" in the app. Then, to reconnect with the app,
you need to scan the QR codes on the drive wheels again.
43