ALL FUNCTIONS IN DETAIL
If you cannot find a QR code on the drive wheels or on the ECS
remote control or if you cannot have it scanned, please contact your
specialist dealer or the Alber Service Centre
2. Resetting the e-motion wheels
- Switch on both e-motion wheels via the on/off button of the ECS
remote control.
- Wait until the e-motion wheels are connected with the ECS
remote control and the Bluetooth symbol
displayed in the LCD of the ECS remote control [2].
- Press the reset button [6] with a narrow but not pointed object
(e.g., ballpoint pen) for at least 3 seconds.
- During the reset process, all display elements in the LCD of the
ECS remote control [2] and the LED display of the two connected
e-motion wheels light up.
46
is continuously