Alber E-Motion ECD Manual Del Usuario página 45

control for at least three seconds with a small but non-pointed
object (e.g. a biro or the supplied tool for changing the batteries)
until the link symbol
remote control.
- As soon as the e-motion drive wheels are recognised by the ECS
remote control (this process can take several seconds), the link
symbol disappears and the Bluetooth symbol
displayed. In addition, the display [2] shows the battery status
and the currently set assistance level 1 or 2.
- The pairing process has been successfully completed. The ECS
remote control can now be used together with the e-motion.
Note:
The pairing process is only possible as long as the LED battery
indicator on both drive wheels is flashing. If the specified time is
exceeded, please repeat the procedure.
also flashes in the display [2] of the ECS
is permanently
45