Sleep Mode - Alber E-Motion ECD Manual Del Usuario

- The symbol now flashes in the LCD [2] until the mode has been
deactivated and acknowledged in both wheels. The symbol is
then no longer shown in the LCD [2].

7. Sleep mode

- If the ECS remote control is not used for more than 120 seconds
after an operation step, it automatically switches to the so-called
„sleep mode" in order to conserve the internal batteries. However,
this has no influence on the function of the e-motion wheels.
- Sleep mode is indicated by the following symbol on the ECS
remote control display [2]:
- In addition, the last activated assistance level and – if activated –
the symbol for the rollback delay are shown in the LCD of the
ECS remote control [2].
55