Alber E-Motion ECD Manual Del Usuario página 47

- Afterwards, the LCD of the ECS remote control [2] shows the
current operating state and the ECS remote control is operational
again.
The following values are returned to the factory settings when
a reset occurs:
- The shut-off time is set to 60 minutes
- The assistance level is set to 1
- All acoustic signals are activated
- The volume of the acoustic signals is set to maximum
- The LEDs of the e-motion wheels are active when switched on
and at a standstill but off during driving
- The rollback delay is switched off
Note:
- Any individual driving profile programmed by your medical supplies
dealer is not changed by a reset.
47