Hauck Roadster SL Instrucciones Para El Uso página 10

INStRUCtIoN oF USE
GB
1. ERECTING (fig. 1).
Release transportation lock.
2. UNFOLDING (fig. 2)
open the stroller until the locking latches on both sides have locked in place.
3. REAR WHEEL ASSEMBLY (fig. 3a, 3b, 3c)
3a. Push both plastic brackets at the same time until they are locked onto the rear legs. Make sure
the pushpin locks in the plastic housing hole securely.
3b. Push the rear wheel with axle onto the rear brake housing until you hear a click sound when the
metal clamp catches groove on the axle. Pull it to ensure it is locked in place.
To remove the rear wheel, release the lock on the rear axle and pull the wheel off (3c).
4. FRONT WHEEL ASSEMBLY (fig. 4a, 4b)
First take out the 2 plastic caps from the front wheel fork (4a), fix the front wheel through the
front axle, then push the 2 plastic caps back to the front wheel fork (4b). Make sure the pushpin
locks in place and cannot be pull off. When changing the wheel, reverse the sequence.
5. ADJUSTING THE FRONT WHEEL (fig. 5)
The front swivel wheel can be adjusted by locking or unlocking the lock, mount on top of the front
wheel.
6. BRAKE (fig. 6)
Press the rear brake down by foot to stop the rear wheels and push the stroller to check.
Attention: Always apply both brakes when parking the stroller.
7. ADJUSTING THE BACK REST (fig. 7a, 7b)
the back rest is adjusted via the pull belt with clasp which is located at the rear part of the seat
upholstery. This enables the inclination of the back rest to be individually adjusted. Pull the belt
while holding the clasp to set the seat in sitting position. Press the button on the clasp and pull
the clasp down to release the seat to lying position.
8. ADJUSTING THE LEG REST (fig. 8)
Press both (left & right) buttons to bring the leg rest to the desired position.
9. ADJUSTING THE HANDLES (fig. 9)
Press both (left & right) buttons on the handle and bring the handle height to the desired
position.
10. INSTALL THE FRONT BAR (fig. 10a, 10b)
Install the front bar just below the locking latches by pushing in the front bar into the housings
(10a). You will hear a click sound when they are secured onto the frame. Test the front bar
by pulling on it to make sure it is locked into place. To release the front bar, push the buttons
underneath and pull out the front bar (10b).
11. ASSEMBLE THE CANOPY (fig. 11)
Slide the canopy plastic housings on the catches above the locking latch on each side.
12. FOLDING AWAY (fig. 12):
Make sure the backrest is always in a recline position. Fold the canopy backward. Put the leg
rest down to the lowest position. Pull the release levers on the right and left up at the same time.
Press the handle down and fold the stroller together. Close the transport lock on the side of
the frame.
13. SECURE THE CHILD IN THE SEAT (fig. 13):
Place the child in the seat and push the clips on the waist belt into the buckle on the crotch belt
(the one that comes between the child's legs). Adjust the length of the belt to your child's needs.
Always ensure the straps are not twisted or caught on the stroller frame. Check the adjustment
every time you place the child in the seat and when the backrest is reclined. To release the
harness, squeeze & open the buckle.
Harness adjustment: Insert both fasteners (B) into the buckle (A), ensure that both buttons click
into position. Ensure both shoulder straps (C) are attached to the fasteners (B). Each strap has
its own length adjuster (D). To undo the harness, press the buttons and pull apart. "D" Rings
are provided for fitment of a full safety harness. The attachment points (D-rings) are located on
side straps.
WARNING: (A child's safety is your responsibility.) The child should be harnessed in at all times
and should never be left unattended. the child should be clear of moving parts while making
adjustments. This stroller requires regular maintenance by the user.
Attention: Avoid serious injury from failing and sliding out, always use seat belt & always use
as instructed. Never use the harness without the shoulder straps.
14. ADJUSTING THE SHOULDER HARNESS (fig. 14)
there are 2 shoulder harness height available in the stroller, use the slot closest to child's
shoulder height.
oPtIoN FEAtURES – SHoP N DRIVE tRAVEL SYStEM:
This stroller is able to adapt our Hauck Zero Plus® Infant Carseat as a Travel System. To
adapt the carseat, please follow the following steps:
A. there is an adaptor clip on the each side of the stroller's folding plastic, pull both of them up.
(figure A).
10