Conceptronic C150APRA2 Manual De Usuario página 46

ENGLISH
D. Click the "Add" button to add a new port forwarding rule.
E. Select a preset service from the "Select a Service" drop down list, or enter a new service name for
your port forwarding rule in the "Custom Server" field.
F. Enter the IP Address of the computer using the port forwarding rule in the "Server IP Address"
field.
G. Enter the ports which need to be accessible from the internet in the "External Port Start" and
"External Port End" fields.
H. Select a prototol or your port forwarding rule from the "Protocol" drop down list: "TCP", "UDP" or
"Both".
Note: If you do not know which protocol you need for your port forwarding, select "Both". This option
will pass both TCP and UDP traffic to the configured IP address of your computer/server.
I. Enter the ports which need to be accessible on your computer in the local network in the "Internal
Port Start" and "Internal Port End" fields.
J. Click on "Apply" to save the por t forwarding rule.
The added rule is now visible in the port forwarding list.
To create more port forwarding rules, repeat steps D to J.
46