Tru-Test EziWeigh5 Guia De Inicio Rapido página 2

Installation
Note:
Mount the indicator and secure the cables so they cannot be damaged by stock.
1 Install load bars under the platform on a firm, level surface (see Load Bar User Manual).
2 Mount the indicator bracket onto a flat surface (timber rails, concrete) or pipe-work.
3 Remove the dust caps on the load bar connectors. Connect the load bar cables to the indicator.
The indicator automatically calibrates with Tru-Test load bars.
4 If required, connect the indicator to the mains power using the power/communication cable and the power adaptor.
Tip: Connect the dust caps together to keep out dirt and moisture. Dust caps should remain in place at all times when the indicator is not in use.
Parts of the indicator