Publicidad
Idiomas disponibles
Idiomas disponibles
14. Locate the rubber grommet at the back firewall.
Push a long fish wire (1) through the grommet from
the outside to the inner footwell.
15. Secure the end of harness (D) to the fish wire with
tape. Pull the end of the harness through to the inside
driver footwell.
16. Pull harness (D) through to the inside behind the
glovebox and route it over towards the BCM
located at the base of the A-pillar.
8/1/14
www.mopar.com
7
Publicidad
