Operation - turbionaire Epl12 Manual De Instrucciones

applications only.
• Do not operate in close proximity to walls, curtains, or other objects that may block
inlet and outlet.
• Keep the air inlet and outlet free of obstacles.
• Adjusting the wind deflector in the upward direction prior to start up.
• If tipped more than 45°, allow the unit to set upright for at least 24 hours before start
up.
• Keep doors and windows close for better energy saving.
• Do not operate or store the unit in direct sunlight or rain.
• It is normal for air outlet to feel warm to touch after continuous operation on hot
days.
• Empty the water tank before moving the device.
• Make sure the Water tank is correctly fitted otherwise the unit will not operate
properly.
• The dehumidifier starts up in the mode selected when the unit was last used.
• The dehumidifier starts dehumidifying if the room humidity is 3% higher than the
selected humidity.
• There is a protective 3-minutes time delay of the compressor. Wait 3 minutes for the
dehumidifier to resume dehumidification.

5. OPERATION

A. 3-colour Humidity LED on the front of the unit
Blue LED indicator – humidity level in the room is lower than 45%
Green LED indicator – humidity in the room is between 45% and 65%
Red LED indicator – humidity level in the room is higher than 65%
If the LED display E0、E2、CL、CH、LO、HI, the light will show red.
B. Control Panel
POWER
After switching on the power, all the indicators and the screen will be on for 1 second and
then off. After a buzzer, the power indicator will be on and the machine will be in standby
mode. Press this button, the machine starts to run, the machine initial humidity is 60%RH,
default automatic mode and high wind operation.
Press this key again, the machine will stop running, and the fan will be closed.
11