Decommissioning - turbionaire Epl12 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 56
No air intake
Is the filter clogged?
Loud noise
Is the unit placed on a horizontal
when running
and flat surface?
Is the filter clogged?
E2
Humidity sensor problem
LO
Environmental humidity
is below 20%
HI
Environmental humidity
is above 90%
CL
Low temperature protection, the
environmental temperature <5°C
CH
High temperature protection,
the environmental temperature
>35°C

8. DECOMMISSIONING

8.1
STORAGE
Long-term storage – If you will not be using the unit for an extended period of time (more
than a few weeks) it is best to clean the unit and dry it out completely. Please store the unit
per the following steps:
a)
Press power button to switch off and unplug the unit.
b)
Drain the remaining water from the unit.
c)
Clean the filter and let the filter dry completely in a shaded area.
d)
Collect the power cord at the water tank.
e)
Re-install the filter at its position.
f)
The unit must be kept in upright position when in storage.
g)
Preserving the machine in ventilating, dry, non- corrosive gas and safe place indoor.
ATTENTION: The evaporator inside the machine has to be dried out before the unit is
packed to avoid component damage and molds. Unplug the unit and place it in a dry open
area for days to dry it out. Another way to dry the unit is to set the humidity point more
than 5% higher than the ambient humidity to force the fan to dry the evaporator for a
couple of hours.
Wash the filter
Place the unit correctly
Wash the filter
Change a sensor
The dehumidifier shuts down
for self-protection
17

Publicidad

Tabla de contenido
loading

Tabla de contenido