Emptying The Water Tank - turbionaire Epl12 Manual De Instrucciones

CHILD-LOCK (LOCK)
Long press this key to open the child lock function.
Long press this key to open the child lock function. The child lock indicator light is
on. All the keys are locked and cannot be operated. Press this button again, the
indicator light will go out, and the button will be restored. Open the child lock
function, as long as the shutdown or power off will automatically cancel the child
lock function.
A. Drainage
There are two ways of removal collected water produced by the unit.
A. Manual draining: the water tank is removed manually.
B. Continuous draining: attach a drain hose to the unit so that the condensed water is
drained by using gravity.
B. Emptying the water tank
When the tank is full, The unit will make a buzzing sound, and the "Water Full" light will turn
on.
•
Press the POWER button to turn off the unit.
•
Pull on the water tank and slide out of the body of the dehumidifier.
•
Empty the water into an area with a drain or outside.
•
Clean the inside of the tank, if necessary, as well as the outside.
•
Replace the empty tank back into the unit.
•
Press the POWER button to resume operating.
• If the "Water Full" LED is still on, check if the water tank float is correctly
placed and free from any blocking.
WARNING
- Do not discard water tank magnets and plastic rivets. Otherwise, the machine will not
automatically stop working when the water tank is full, and the condensed water will
overflow and damage the floor of the room.
- Please be sure to clean the condensed water in the water tank before resetting the
working mode of the machine.
13