First Time Usage - Sveon SPremiere Serie Manual De Usuario

9. First time usage

Before using SPM1000 please:
- Install the provided batteries in the remote control.
- Connect the device to your TV depending on the selected output (please read carefully the section 7 of this user guide).
- Connect the antenna cable to the RF connector in the unit.
- Connect the power adaptor to the power outlet.
9.1 Main Menu
When you turn the device on appears the Main
Menu screen where you can choose between the
following options: "DVB-T", "Movie", "Music", "Pic-
tures", "Files" or "Slide Show". If you want to enter
to Setup options please press "Setup" button of
the remote control. Select the type of file you want
to play (Movie, Photo or Music) and then select
the storage unit where are saved the files you
want to play: you can choose between the inner
hard disk, a memory card inserted in the card re-
ader slot of the device or an USB external storage
device connected through the USB Host port.
Main Menu includes the following options:
- Movie: Select to access to the video files saved in the inner hard disk or in an external storage device. The files are
shown without sort and without maintain the folders structure.
- Music: Select to access to the music files saved in the inner hard disk or in an external storage device. The files are shown
without sort and without maintain the folders structure.
- Pictures: Select to access to the picture files saved in the inner hard disk or in an external storage device. The files are
shown without sort and without maintain the folders structure.
- Slideshow: Select to play all the picture files saved in the device (inner hard disk or external storage devices) in Slide
Show mode. During this function, the device plays music files saved in the selected storage device in random mode.
- Files: This option allows you to explore all the files saved in the device (inner hard disk or external storage device) main-
taining the folders structure.
Important
1. Do not cover the unit, even when you are not using it.
2. Do not use the device in surfaces like a sofa, bed or similars because these kind of surfaces don´t allow the correct air-
flow of the device.
3. Put the device in a place with good airflow.
4. Power adaptor gets hot during its usage around 40º~50º.
9.1.1 DVB-T
Select "DVB-T" option in the Main Menu and press "Enter" of the remote control;you can also press the button "DVB-T"
of the remote control. Please note first time you use the device you have to scan the available DVB-T TV channels and
radio stations. Follow these steps:
1. Wait during some seconds. The TV screen will
show the following message: "No signal".
2. Press "Setup" button of the remote control and
go to "DVB-T" option. Select "Channel Scan" and
a window will appear to do the channel scan pro-
cess.
3. Select your country and press "Enter" button.
4. You can scan the DVB-T channels in an auto-
matically mode or in a manual mode. If you want
to scan the channels in an automatically way se-
lect "Auto Scan" and the device will start to scan
the available channels using the frequency of
range by default. Press "Stop" if you want to stop
the channel scan. DVB-T TV channels found will
appear in the left of the screen and DVB-T radio
stations found will appear in the right of the
screen.
SPM1000 User Guide
Index
1. Welcome
2. Features
3. System Requirements
4. Content
5. Hardware
6. Remote Control
7. TV Connections
7.1 AV Connection
7.2 HDMI Connection
8. Playback from external storage devices
8.1 USB external storage device
8.2 Direct playback from memory cards
9. First time usage
9.1 Main Menu
9.1.1 DVB-T
9.1.2 Movie
9.1.3 Music
9.1.4 Pictures
9.1.5 Files
9.1.6 Slide Show
10. Setup Menu
11. Basic operations
12. Firmware upgrading
13. FAQs
English 21