Sveon SPremiere Serie Manual De Usuario página 29

Ocultar thumbs Ver también para SPremiere Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

5. When the process finishes the unit will be restarted automatically. If it doesn´t, please turn it off and turn it on again.
6. Delete the upgrading file or disconnect the external storage device.
For further information please contact with our Technical Support Department.
13. FAQs
The remote control doesn´t work
Please check if you have properly installed the batteries in the remote control.
Audio signal is disabled
Check if the "Mute" option is enabled or not. If it is enabled, please disable it.
Go to "Setup" menu and check the if the selected audio output matchs with the connections of the device.
If you are watching a file with different audio tracks please check if you have selected the correct audio track by pressing
"Audio" button of the remote control until select the correct audio track.
There is not TV singal
Check if the TV and your device are powered on.
Check if the connections are properly done between the device and your TV.
Check if the selected video output matchs with the connections made between the device and the TV. Press "HDMI/AV"
button to change between the different video outputs.
I can not access to the external USB storage devices
Check if the USB device is properly connected.
If you are using an USB stick, please check if it is locked.
If you are using an external USB hard disk, please check if it receives power supply enough. If the device hasn´t power
supply enough please connect its power adaptor to the power outlet.
Check if the external storage device is formatted in FAT16/32 or NTFS.
I can not access to the memory card inserted in the slot of the device
Check if the memory card is properly connected and if it is locked.
Take the card and insert it again in the slot of the device. Check if the format of the memory card is supported by the
device (SD or MMC).
Please check the memory card in another card reader to know if it works.
I can not scan any DVB-T channel
Make sure the antenna cable is properly connected.
Make sure the RF antenna is ready to receive DVB-T signal.
Make sure you have selected the correct country in the DVB-T menu.
SPM1000 User Guide
Index
1. Welcome
2. Features
3. System Requirements
4. Content
5. Hardware
6. Remote Control
7. TV Connections
7.1 AV Connection
7.2 HDMI Connection
8. Playback from external storage devices
8.1 USB external storage device
8.2 Direct playback from memory cards
9. First time usage
9.1 Main Menu
9.1.1 DVB-T
9.1.2 Movie
9.1.3 Music
9.1.4 Pictures
9.1.5 Files
9.1.6 Slide Show
10. Setup Menu
11. Basic operations
12. Firmware upgrading
13. FAQs
English
29

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Spm1000

Tabla de contenido