Publicidad
Idiomas disponibles
Idiomas disponibles
After successful calibration, the depth display 9.) indicates as
follows as metal is approached:
Metal detection begins at a distance of about 75mm. The
indicated value lessens as the tool approaches further, until it
is located directly above the metal object. In this position, the
distance to the metal object, i.e. the depth, is displayed (e.g.
about 25mm).
Tip 3: Localisation of metal:
Because of its high sensitivity, the MetalliFinder Pro can
normally detect objects in a broad radius beneath the relevant
surface. If you want to determine the actual centre of the
hidden object, you must move the MetalliFinder from both left
and right towards the object.
A
First of all, move the device across the surface until the
Measuring centre LED (1) lights up briefly and an acoustic
signal sounds once.
B
Next, move the device in the other direction. When
the device is above the target object, the LED (1) lights up
continuously and a constant signal sounds.
Y
08
GB
=
=
L
M
R
Z
Publicidad
