Mopar 82212440 Instrucciones De Montaje página 3

11. Plug in the engine block heater cord (1) to the element.
12. Begin routing the cord (1) upward towards the front
of the engine and install the edge biter clip (2) to the
driver side intake manifold fin.
13. Continue routing along the upper front portion of the engine, securing the engine block heater cord (1) to the existing
vehicle harness with the kit supplied tie straps (2).
14. Install the retainer clip to the hole on the passenger side of the front end module.
Sep 14, 2010
3
K6861086 REV1