Omega Mugello 2525 Manual De Instrucciones página 36

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

BUCKING AND LIMBING
ALWAYS ENSURE YOUR FOOTHOLD.
DO NOT STAND ON THE LOG.
BE ALERT TO THE ROLLING
OVER OF A CUT LOG. ESPECIALLY
WHEN WORKING ON A SLOPE, STAND
ON THE UPHILL SIDE OF THE LOG.
FOLLOW THE INSTRUCTIONS IN "FOR SAFE
OPERATION" TO AVOID KICKBACK OF THE
SAW.
Before starting work , check the direction of bending force inside
the log to be cut. Always finish cutting from the opposite side of
the bending direction to prevent the guide bar from being caught
in the cut.
A LOG LYING ON THE GROUND
Saw down halfway, then roll the log over and cut from the opposite
side.
A LOG HANGING OFF THE GROUND
In area A, saw up from the bottom one- third and finish by sawing
down from the top. In area B, saw down from the top one-third and
finish by sawing up from the bottom.
CUTTING THE LIMBS OF FALLEN TREE
Check to which side the branch to be cut is bent. Begin by making
a cut from the side to which the branch is bent and finish the cut
from the other side.
WORK CAREFULLY, BECAUSE THE CUT
BRANCH CAN JUMP BACK.
PRUNING OF STANDING TREE
Cut up from the bottom, finish down from
the top.
DO NOT USE AN UNSTABLE
FOOTHOLD OR LADDER. DO NOT
OVERREACH. DO NOT CUT ABOVE
SHOULDER HEIGHT. ALWAYS USE
BOTH YOUR HANDS TO HOLD THE
SAW.
14
14
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido