System Setup - Clarion CZ702E Manual De Instrucciones Y De Instalación

Volume adjustment
Rotate the [VOLUME] knob on the front
panel or press the [ ] or [ ] button on the
remote control.
The adjustable range of volume is 0 to 40.
CAUTION
While driving, keep the volume level at
which external sounds can still be heard.
Playing source selection
Press [SRC / ] button on the front panel or
remote control repeatedly to choose desired
playing source.
Note:
Playing source selection means selecting
which mode, such as DISC mode, RADIO
mode and AUX mode.
Display system time
Press the [DISP] button on the front panel
or [DISP] button on the remote control to
switch the display information from clock,
station information (RADIO mode), or track
information (CD mode).

System Setup

In any mode, press and hold [ DISP ] button
to enter system setup. Press [ ] or [ ]
button to select options, rotate the [VOLUME]
knob to adjust.
AF: ON/OFF (RADIO mode)
Rotate the [VOLUME] knob to choose AF oN
or off.
REG: ON/OFF (RADIO mode)
Rotate the [VOLUME] knob to choose REG
oN or off.
DX/LO (RADIO mode)
Rotate the [VOLUME] knob to choose radio
local or distant at radio mode.
• LO: Only stations with strong signal can be
received.
• DX: Stations with strong and weak signals
can be received.
RESET
If you have below problems, pls press
[RESET] button.
• Unit can not power on
• Nothing happens when buttons are pressed
• Display is not accurate
Note:
* When the [RESET] button is pressed,
preset radio stations, titles, etc. stored in
memory are cleared.
RESET
To keep the current sound settings, when
power on first time after reset, rotate the
[VOLUME] knob to select "LOAD", press the
knob to confirm.
AUX SENS (AUX mode)
Rotate the [VOLUME] knob to choose AUX Input
sensitivity LOW, MID or HIGH at AUX mode.
SELECT (BT mode)
T h i s " S E L E C T " m e n u i s i n t e n d e d t o
automatically paired by selecting a mobile
phone was stored.
This unit can store three mobile phones. The
mobile phone will be stored in paired order
to the unit. The mobile phone can be stored
up to three. The fourth mobile phone can not
be stored. If you want to store a fourth mobile
phone, please delete unwanted mobile phone
from "DELETE" menu.
1. Rotate the [VOLUME] knob to choose the
pair mobile phone name from the pairing
list.
2. Press and hold the [VOLUME] knob to
confirm.
System Setup
DELETE (BT mode)
1. Rotate the [VOLUME] knob to choose the
paired mobile phone name from the pairing
list.
2. Press and hold the [VOLUME] knob to
confirm.
DISCON (BT mode)
Disconnect currently connected mobile phone.
1. Rotate the [VOLUME] knob, mobile phone
displays are currently connected.
2. Press and hold the [VOLUME] knob to
disconnect.
MIC GAIN (BT mode)
Rotate the [VOLUME] knob to choose Mic
gain: -5,-4,-3,-2,-1,0,1, 2, 3, 4, 5.
You can change the gain of MIC when a
telephone partner cannot hear your voice.
You can listen to your telephone calls from
the speakers connected to this unit.
* When listening to your calls on your
car speakers, you can adjust the volume
by turning the [VOLUME] knob.
MIC SEL (BT mode)
Rotate the [VOLUME] knob to choose
Microphone EXTERNAL or INTERNAL.
TONE SEL (BT mode)
You can get mobile phone ring tone from the
speaker.
Rotate the [VOLUME] knob to choose AUTO
or INTERNAL.
• AUTO:
Mobile phone ring tone from the speaker.
• INTERNAL:
The unit original ring tone from the speaker.
AUTO ANS (BT mode)
To answer incoming calls automatically.
Rotate the [VOLUME] knob to choose AUTO
ANS oN or off.
AUTO CON: ON/OFF (BT mode)
Automatically connects the mobile phone was
last connected.
Rotate the [VOLUME] knob to choose AUTO
CON ON or OFF.
PIN CODE
Rotate and press the [VOLUME] knob
to choose a 4-digit password. Press the
[VOLUME] knob more than 1 seconds to
confirm.
The PIN CODE default setting is " 0000 ".
COLOR
Rotate the [VOLUME] knob to choose
backlight color.
SCN: The backlight change circularly.
COLOR 01~09: Select a preset color.
USER1~3: Select your favorite color. Press
the knob to enter color setting mode, press
[ ] or [ ] button to select GREEN, BLUE
or RED, the rotate the [VOLUME] knob to
select a color.
Press and hold [ VOLUME ] knob to memory.
SCRN SVR: ON/OFF
Rotate the [VOLUME] knob to choose SCRN
SVR (screen saver) ON or OFF.
SCROLL: ON/OFF
For track information that is longer than the
display panel:
When SCROLL is ON, the LCD will display
ID3 TAG information cyclely, e.g: TRACK-
> F O L D E R - > F I L E - > A L B U M - > T I T L E -
>ARTIST->TRACK->...
When SCROLL is OFF, the LCD will display
one of the ID3 TAG information, the default
is TRACK, but user can adjust it to other ID3
TAG information by press [ DISP ] button.
S-CTRL (IPOD mode) : ON/OFF
Rotate the [VOLUME] knob to choose S-CTRL
(Simple Control) ON or OFF.
* Refer to Page 12.
TEL-SW
Rotate the [VOLUME] knob to choose MUTE,
oN or off.
• MUTE:
The sound from this unit is muted during
telephone calls.
• OFF:
This unit continues normal operation even
when the cellular phone is used.
CZ702E
7