Nice OVBT Instrucciones Y Advertencias Para La Instalación Y El Uso página 17

6.4 – "SETTINGS" Area
In this section the user can check and if required modify the general
parameters of the software. To access this section, from the Home
page click on the icon "Settings"; this displays a window containing
the items "General" and "Connection" (fig. 15):
• "General" – Used to display and modify the program language.
Important – This parameter is modifiable exclusively on the software
version for PC. On the version for palmtops, only the language adopted
by the operating system can be displayed;
• "Connection" – Used to configured the connection between PC and
Bluetooth ® devices or for the serial connection.
There are two types of configuration: "Direct connection" and "Serial
connection".
– Direct connection – Factory setting. Used for the Bluetooth
connection. Using this type of connection, on start-up of the soft-
ware or when a Bluetooth ®
already in use, a window is displayed, containing the list of connec-
ted Bluetooth devices (fig. 16).
®
In this window, to proceed the required device must be selected,
after which enter the "Passkey(*)" and select "OK".
– Serial connection – used when the "direct connection" cannot be
used and therefore a manual configuration of the Bluetooth
nection is required. To use this type of connection, the number of the
15
device is connected and the software is
serial port of the Bluetooth
supplied with the configuration of the device (refer to the relative in-
struction manual).
The item "Connection" also contains the function "Find oview". This
serves to start a forced search for Oview devices present. To start this
search, select the item "Find oview"; when the required device is found
a window is displayed (fig. 16) showing a list of the Bluetooth
found. To proceed, the required device must be selected, after which
enter the "Passkey(*)" to enable access to the device.
(*) Note – The "Passkey" is the Oview password that enables access
to the latter when connected via Bluetooth
Smartphone. Personalisation of the Passkey is recommended (the fac-
tory setting is 0000) to avoid unauthorised access to Oview. Caution!–
®
Do not forget the new Password, or Oview will no longer be accessi-
ble.
® con-
16
® adaptor must be known. This number is
® to the PC or Palmtop/
® devices
English – 15