Product Description And Intended Use; Installation Of Product - Nice OVBT Instrucciones Y Advertencias Para La Instalación Y El Uso

PRODUCT DESCRIPTION AND
1
INTENDED USE
This product consists of a software package and a module for wire-
less connection between Oview and the computer where the software
is installed. Depending on the model purchased, this package may
contain the OVBT or OVBTGSM module.
The software is supplied in two versions, one for PC and one for palm-
top or smartphone. They both perform the same operations that can
be performed with an Oview programmer: a) configuration of the net-
work address of each device (control unit and receiver) present on a
"BusT4" network; b) programming the functions and setting the
parameters of each individual device present in an automation; c)
complete diagnostics of the state of operation of the automation and
its constituent devices; d) control of the automation or a number of
automations by means of a wide range of advanced controls.
Additionally, this product also performs other exclusive and specific
functions that enable the potential of Oview to be considerably ex-
panded. These functions are:
- possibility of connecting to Oview (and therefore to the automation)
via the module and software by means of wireless communication,
which can be activated at any distance from Oview according to the
characteristics of the purchased module (see fig. 1);
- a detailed and intuitive graphic interface via the monitor of the com-
puter system used;
- simpler and more convenient navigation and data entry by means of
the keyboard of the PC or palmtop;
- possibility of creating a database to manage and save modifications
applied to programmed devices;
- possibility of performing diagnostics with more comprehensive and
immediate graphics;
- possibility of updating the devices with new firmware releases or with
new functions and languages issued by Nice.
For use, the software must be installed on a PC and/or Palmtop an-
d/or Smartphone, equipped with Windows
requirements, refer to paragraph 4.1) and with the connectivity ac-
cording to the type of module present in this package: Bluetooth
GSM ® or GPRS ® .
Nice declines all liability for damage resulting from improper use
of the product and other than as specified in this manual.

INSTALLATION OF PRODUCT

2
COMPONENTS
To use the software, the various components must first be in-
stalled and configured in the following order:
1 - installation of communication module on back of Oview;
2 - installation of software on the chosen computer device (Pc,
Palmtop, Smartphone or other device);
3 - configuration of Oview and the computer device to activate
the connection between them;
4 - use of software.
® operating system (for
® ,
English – 3