Memory Function - Terraillon TFA NAUTIC Manual Del Usuario

IM TFA NAUTIC OK 7/03/05
ELECTRONIC BATHROOM SCALE - BODY FAT ANALYZER
BODY FAT AND BODY WATER
MEASUREMENT MODE
1. Press [ ON ] button to enter the body water and
body fat measurement mode, the height figure of
the previous setting will be displayed on the
toggle screen. The height figure will be blinking.
2. Press [ L / M ] button to increase or decrease the
height input.
3. Press [ ] button to confirm height input, the
age figure of the previous setting will be dis-
played on the LCD screen and will be blinking.
4. Press [ L / M ] button to increase or decrease the
age.
5. Press [ ] button to confirm age. The gender
icon will start to blink.
6. Press [ L / M ] button to toggle between Male
[ ] and Female [
7. Press [ ] button to confirm the gender. The
arrow next to the athlete/normal mode will begin
to flash.
8. Press [ L / M ] button to toggle between athlete (A)
and normal (N) icons.
N.B.: The Athlete Mode selection is only available
to those aged 18 or older. For those aged 17 or
under, this step is automatically by-passed
9. Press [ ] button to confirm all settings with
1 long beep. « R » icon will be displayed on the R
display.
As soon as you hear the loud beep, step on the
scale with bare feet.
19:09 Page 15
CM
KG
] icons.
10. Step on the scale with bare dry feet. Stand still
while the unit measures your weight. The weight
will be displayed for 2 seconds.
11. Then it will start to measure your body water and
body fat percentages. The following measurement
pattern will be shown on the display during the
measurement process.
12. The measurement process finishes with 1 long
beep. The body water and body fat percen-
tages, weight will be shown on the screen; the
screen will change every 2 seconds. The unit
will turn off automatically after 8 seconds.
%
KG

MEMORY FUNCTION

The product features 10 personal memory settings.
This allows users to store height, age, gender
athlete/normal for frequent usage.
To store Memory
1. Follow steps 1-9 in Body Fat and Body Water
measurement mode procedure.
2. Press [ L / M ] to select the memory location and
the memory figure will be blinking.
3. If the selected memory location is occupied, it
will display " II " below the memory figure.
%
KG
15