1
6
6
3
3
A
2
A
B
B
5
4
- Mount the clamp on the new bracket with the original screw.
- Slide the carrier (1) with the mounted clamp onto the main silencer
and mount the carrier with the original screws (2) (20Nm).
- Mount the screws M6x20 (included) at position (A) (Loctite 243).
- Mount the rear side part (5) at position (B) with the special screws
50x16 (included).
- Position the heat protector (3) and mount the bag carrier (4) with the
collar screw M8x20 (included) (15Nm, Loctite 243).
Final steps
NOTE:
Perform the operations on both sides of the motorcycle.
- Mount the grab handles (6) (20Nm).
- Mount the seat.
Please note that carrying luggage can change the handling characteristics.
Danger of falling off!
Important information for carrying luggage:
Maximum payload per side case 5kg.
Check that all connections are firm after riding 50km.
It is recommended that you check all connections regularly to ensure that
they are firmly closed.