KTM 75038050044 Guia De Inicio Rapido página 5

Scope of supply:
Oil cooler set
1x Oil cooler
2x Spacer
1x HH tool, A/F=14
1x Oil thermostat
8x CU seal ring, DIN 7603 - 10x14x1
4x M10x1 banjo bolt
1x Left oil line
1x Right oil line
2x M6x12 HH collar screw
Allow the motorcycle to cool down before you install the oil cooler.
Clean the engine to prevent dirt from getting into the oil circuit. We
recommend that you have the oil cooler installed by a qualified service
technician. Improper installation can lead to engine damage and cause
the motorcycle to go out of control!
Mounting
Remove the seat, tank and engine sprocket cover as described in the Owner's
Manual. Remove the plug and O-ring with the HH tool, A/F 14, included
in the scope of supply.
Seal the oil thermostat without an O-ring with Loctite 243, screw it in and
tighten to 15 Nm.
Remove the plug behind the chain securing guide.
Remove the plug next to the oil thermostat.
75038050044
75038050000
55011022100
75038030040
75038047000
0603100141
54313025000
75038010000
75038020000
0025060126
5