Connecting A Hunter "Clik" Weather Sensor; Testing The Weather Sensor; Manually Bypassing The Weather Sensor - Hunter X-CORE Manual Del Usuario

CONNECTING A HUNTER "CLIK" WEATHER SENSOR

A Hunter weather sensor or other micro-switch type weather
sensors can be connected to the X-Core. The purpose of this sensor
is to stop automatic watering when weather conditions dictate.
1. Remove the metal jumper plate that is attached across the two
SEN terminals inside the controller.
2. Connect one wire to one SEN terminal and the other wire to the
other SEN terminal.
24VAC REM
SEN C P 1 2 3 4 5 6
BAT
When the weather sensor has
deactivated automatic watering, the
OFF, and icon will appear on the
display.

Testing the Weather Sensor

The X-Core provides simplified testing of a rain sensor when the
sensor is wired into the sensor circuit. You can manually test proper
operation of the rain sensor by running an AUTO CYCLE or by
activating the system using the One Touch AUTO CYCLE (See page
22). During the Manual cycle, pressing the top spindle on the Hunter
7 8
sensor will interrupt watering.

Manually Bypassing the Weather Sensor

If the rain sensor is interrupting irrigation,
you can bypass it by using the bypass switch
on the front of the controller. Slide the
switch to the SENSOR BYPASS position to
disable the rain sensor from the system to
allow for controller operation. When using
the MANUAL – ONE STATION function, the
controller will automatically bypass sensor inputs for the selected
time. Once complete, the controller will default to selected settings.
NOTE: Enabling the Sensor Bypass switch has no
effect on the seasonal adjust updates from the Solar
Sync sensor. It will, however, bypass the Rain Clik
and Freeze - Clik functionality of the sensor.
EN
BYPASS
/DAY
ACTIVE
13