Clik Delay Instructions - Hunter X-CORE Manual Del Usuario

CLIK DELAY INSTRUCTIONS

Clik Delay Feature
This feature allows the user to delay programmed waterings for a
designated period (from 1-7 days) AFTER a Clik Event ends. At the
end of the Programmed Clik Delay period, the controller will resume
normal automatic irrigation.
1. Turn the dial to the RUN Position
2. Press and hold the button for 3 seconds, then turn the
dial to the OFF position
3. Release the button. The display will show the program-
mable Clik Delay.
SENSOR DAYS LEFT
4. Press the button to set Clik Delay duration (from 1 to 7 days).
5. Return the dial to the RUN position. Clik Delay is set.
After a Clik Event ends (rain sensor changes from wet to dry) the
Clik Delay feature will become active and the screen will display Clik
Delay duration. The day countdown will occur 24 hours after the
start of Clik Delay.
SENSOR DAYS LEFT
An active Clik Delay can be cancelled by turning the dial to the OFF
position, waiting for OFF to stop flashing, then turning the dial back
to the RUN position.
Any station that is set to override sensor, as well as Lighting Pro-
grams, will operate during a Clik Delay event.
NOTE: Use caution when using the programmable
Clik Delay feature with Hunter Wind-Clik®,
Freeze-Clik®, Soil- Clik, and freeze component of
Solar Sync and Rain/Freeze Clik as the Clik Delay will
become active AFTER Clik Event from these devices.
27