CD/MG-MS Player
CD/MD Unit (optional)
In addition to playing a CD with this unit, you
can also control external CD/MD units.
Note
If you connect an optional CD unit with the CD TEXT
function, the CD TEXT information will appear in the
display when you play a CD TEXT disc.
: Operation by this unit
: Operation by card remote commander
Playing a disc
(With this unit)
1
Insert a disc (page 10).
2
Press N.
Playback starts after the disc tray and front
panel closes.
If a disc is already inserted, press (SOURCE)
repeatedly until "
(CD icon)"or "CD"
appears in the display, and playback starts. (If
you press Z, the disc tray closes but playback
does not start.)
Notes
• Do not place more than 1 disc on the disc tray.
• The disc tray and front panel closes automatically
after the caution alarm beeps.
To
Press
(OFF)
Stop playback
(OPEN/CLOSE) for 1
Eject the disc
second
(OPEN/CLOSE), then Z
Skip tracks
. >
– Automatic Music
[once for each track]
Sensor
Fast-forward/
. >
reverse
[hold until the desired point]
– Manual Search
(SHIFT), then
Skip albums*
– Album selection
lever up/down [once for
each album]
lever up/down
lever up/down
. >
To
Press
(OFF)
Stop playback
</, (
Skip tracks
– Automatic
[once for each track]
Music Sensor
</, (
Fast-forward/
reverse
[hold until the desired point]
– Manual Search
M/m (+/–)
Skip albums*
– Album selection
[once for each album]
* Available only when an MP3 file is played.
Notes
• There is a delay for a few seconds after pressing
(OPEN/CLOSE) or Z before the disc tray is ejected,
while the data in the disc is being read.
• Depending on the recording method used on the
disc, it may take a minute or more before playing the
first track.
• Depending on the condition of the disc, it may not
play back (page 47, 48).
• While the first/last track on the disc is playing, if m or
M is pressed, playback skips to the last/first track of
the disc.
• When the last track on the disc has finished,
playback restarts from the first track of the disc.
• With the optional unit connected, playback of the
same source will continue on to the optional CD/MD
unit.
(With optional unit)
1
Press (SOURCE) repeatedly until "
(CD icon)," "CD," or "
"MD" appears.
2
Press (MODE) repeatedly until the
desired unit appears.
Playback starts.
Locating a track and disc
See "Locating a track/disc by name" on page 26.
.
/
>
)
m
/
M
)
(MD icon),"
21