4 Setup
4.1 Safe Assembly
WARNING!
Risk of Injury
Improper assembly may cause injury or damage.
– Assembly MUST be performed only by qualified
personnel.
– Use only Invacare parts in the assembly of
this patient lift. The base legs, the mast,
boom, pump assembly and the hanger bar
are manufactured to specifications that assure
correct alignment of all parts for safe functional
operation.
– DO NOT overtighten the mounting hardware.
This will damage the mounting bracket.
There are no tools required to assemble the patient
lift.
If there are any issues or questions during assembly,
contact a local Invacare representative. Refer to the
contact information on the last page in this manual.
1575480-E
4.2 Assembling the Mast to the Base
WARNING!
– The mast may be folded for storage or
transporting. Each time the mast is folded, the
mast MUST be properly secured to the base
assembly.
– Check all parts for visible defects or damage
before assembly. In case of any damage, do
not use the product and contact Invacare.
– Make sure the emergency stop is activated
before assembly or disassembly.
– Take care when lifting components during
assembly. Some parts are heavy. Always
remember to adopt the correct lifting position.
Perform unpacking and assembly operation at floor level.
Setup
13