Setup Menu - DeFelsko PosiTector SPG Guía Rápida

All manuals and user guides at all-guides.com
Reset
Reset (soft reset) restores factory settings and returns the
instrument to a known condition. The following occurs:
- All batches, stored measurements, images, and batch names
are erased.
- The zero adjustment is returned to the factory setting. Since
this may not always be a precise zero, the gage should be
checked on the glass plate.
- Menu settings are returned to the following:
Memory = OFF
Statistics Mode = OFF
Perform a more thorough Hard Reset by powering down the
instrument, waiting several seconds, then simultaneously holding
both the center
appears. This returns the instrument to a known, "out-of-the-box"
condition. It performs the same function as a menu Reset with
addition of:
- Bluetooth Pairing info is cleared.
- Menu settings are returned to the following:
Units = microns
Flip Display = Normal
Auto Sync = OFF
White on Black = OFF
USB Drive= ON
NOTES:
Date, Time and WiFi are not affected by either Reset.
Battery Type
Selects the type of batteries used in the Gage from a choice of
"Alkaline", "Lithium"
rechargeable). If NiMH is selected, the Gage will trickle charge the
batteries while connected via USB to a PC or optional AC charger.
The battery state indicator icon is calibrated for the selected
battery type. No damage will occur if the wrong battery type is
selected.
NOTE:
DeFelsko recommends the use of eneloop (NiMH)
rechargeable batteries.

Setup Menu

Setup Menu
Hi Lo Alarm = OFF
Bluetooth = OFF
and (+) buttons until the Reset symbol
Language = English
Battery Type = Alkaline
Backlight = Normal
Bluetooth Streaming = OFF
or "NiMH"
5
(Nickel-metal hydride