Installing And Securing The Device - Kaco blueplanet 50.0 TL3 M1 WM OD IIGS Manual Del Usuario

7
B
A
D
C
Fig. 7: Minimum clearances for wall mounting
Key
1 Mount
2 Fixings for mounting [S12 – Ø 12mm/ 90mm]
3 Lock washer
4 Screws for mounting (5x) [SW 13 / Fastening the
mount [See section 6.3} Page 15]]
A Minimum clearance: 120 mm (without device370
mm )
recommended distance400 mm (without device 550
mm *)
B Minimum clearance: 300 mm
↻ Cardboard packaging with mount and mounting kit removed from the packaging and opened.
1 Mark the mounting position on the wall surface according to the position of the mount by drawing a line.
2 Mark the positions of the drill holes using the slot in the mount.
NOTE: The minimum clearances between two devices, or the device and the ceiling or floor have already been
taken into account in the diagram.
3 Fix the mount to the wall using suitable mounting fixtures from the mounting kit.
NOTE: Make sure that the mount is oriented correctly.
» Proceed with the installation of the device.
6.4

Installing and securing the device

CAUTION
Risk of injury from improper lifting and transport.
If the device is lifted improperly, it can tilt and result in a fall.
› Always lift the device vertically using the openings provided.
› Use a climbing aid for the chosen installation height.
› Wear protective gloves and safety shoes when lifting and lowering the device.
› Do not attach the unit to the web of the upper side of the housing.
Page 16
111 mm
1
2
6
3
4
5
A
8
250 mm
**
**
Fig. 8: Wall mounting
5 Screw for securing purposes (1x)
6 Bracket to prevent device displacement
7 Marking as installation aid
8 Seating recess
C Minimum clearance: 500 mm
D Recommended clearance: 550 mm
1
KACO blueplanet 50.0 TL3