Publicidad
Idiomas disponibles
Idiomas disponibles
3
4.
Insert Mounting Plate "C" into end of Bumper Beam. Secure locating tabs into slots. Insert Tow Hook "A" into front
rail opening. Align and insert 90mm Bolt "F" through mounting hole and rear of tow hook assembly and secure with
mounting bracket "D". Be sure bracket snaps into cross member. Tighten 90mm bolt to 50 Nm (37 ft. lbs.)
Install (3) 18mm bolts "E" at locations shown. Tighten 18mm bolts to 50 Nm (37 ft. lbs.)
TO FRONT
OF VEHICLE
12/3/2010
Publicidad
