Publicidad
Idiomas disponibles
Idiomas disponibles
10
19. Using two screws, install the footman loop to the door.
Tighten the screws to 5 N.m (44 in. lbs.).
20. Install the hinges to the exterior side of the door.
21. Install the weatherstrip (1) to the door, attach a weath
erstrip retainer (2) to the hole located on the top por
tion of the door and work towards the opposite side
by inserting the weatherstrip (1) into the door chan
nel. When installed, install the second weatherstrip
retainer into the hole located on the top portion of the
door.
22. Repeat steps for the opposite side door.
CONNECTOR
NOTE: If equipped with power windows and/or locks you must replace the 2 way connector with the supplied
10 way connector.
Mar 31, 2009
K6860781 Rev. 1
Publicidad
