Door Adjustment - Mopar 82212124AB Instrucciones De Montaje

Idiomas disponibles

7. Install the mirrors to the front door.

Tighten the bolts to 13 N∙m (10 ft. lbs.).

8. Repeat steps for opposite side.

DOOR ADJUSTMENT

NOTE: Door adjustment measurements should be taken from stationary or welded body panels like the roof,

rocker or quarter panels.

NOTE: During adjustment procedures, it is recommended that all the hinge fasteners be loosened except for

the upper most fasteners. Adjustments can be made using the upper bolts to hold the door with ﬁnal torque of

the fasteners occurring after correct door positioning is achieved.

NOTE: A suitable body sealant should be used when removing or moving the hinges.

FORE/AFT

NOTE: Fore/aft (lateral) door adjustment is done by

loosening the hinge to the door fasteners one hinge

at a time and moving the door to the correct position.

1. Support the door with a suitable lifting device.

2. Loosen the upper (1) and lower (4) hinge to door fas

teners.

3. Adjust the door to the correct position.

Tighten the hinge to door bolts to 26 N∙m (19 ft. lbs.).

Mar 31, 2009

K6860781 Rev. 1

Tabla de Contenido