Horizon Global 76547 Instrucciones De Montaje página 5

3. Remove taillight cover/light – Use plastic trim tools to remove the plastic taillight cover from the driver side. Use T25 torxbit remove (2) screws behind the cover
that was removed. Gently disconnect the taillight from the vehicle and set aside. Repeat these steps for passenger side. Repeat this process for passenger side.
4. Remove plastic cover – Use flat head screwdriver to remove plastic cover below driver side taillight. Use T30 torxbit to remove (1) screw from under plastic
cover. Repeat this process for passenger side.
5. Remove fascia - Use plastic trim tools to remove the fascia starting at the outer edges near the wheel wells and gently pull the fascia. Carefully set the fascia
aside for reinstallation
©2021 Horizon Global™ Corp - Printed in Mexico Sheet 5 of 18 76547NP 10-1-21 Rev. A