Technical Data; Function Of The Unit; Overview (A); Assembly - Rothenberger ROSCOPE mini Instrucciones De Uso

Interrupt the power circuit of electrical lines in the working range. These measures reduce the
risk of explosion, electric shock and property damage.
- Wear appropriate protective equipment such as safety glasses/goggles, protective gloves or
respirator when materials that are hazardous to one's health are in the working range. Sewer
lines or similar areas can contain solid, liquid or gaseous substances, which may be toxic, infec-
tious, caustic or otherwise hazard to one's health.
- Pay particular attention to cleanness when working in areas with substances that are haz-
ardous to one's health. Do not eat during work. Avoid contact with substances that are hazard-
ous to one's health. After finishing your work, wash hands and other affected body parts that may
have come into contact, with warm soapy water.
- Do not stand in water when using the inspection camera. When standing in water while work-
ing, there is a risk of electric shock.
Magnet:
Keep the magnet away from cardiac pacemakers. The magnet generates a field
that can impair the function of cardiac pacemakers.
- Keep the magnet away from magnetic data medium and magnetically-sensitive equipment.
The effect of the magnetic can lead to irreversible data loss.
2

Technical Data

Part Number (basic unit) .............................. 1500002878
Batterietyp ................................................... 4 x 1,5V LR6 (AA)
Operating time, approx. ............................... 3,5 h
Rated voltage .............................................. 6 V
Operating temperature ................................ 0°C - 50°C
Storage temperature .................................... -20°C - 60°C
Relative humidity ......................................... 95% RH non-condensing
Display resolution ........................................ 320x240 RGB with LED backlight (2.5-inch Color)
Smallest bending radius of camera cable .... 25 mm
Diameter of camera head. ........................... 8,5 mm
Dimensions (L x W x H) ............................... 152 x 90 x 40 mm
3

Function of the Unit

3.1 Overview
1 Hand unit
2 Camera cable
3 Camera head
4 Battery lid
5 Pull-out battery compartment
6 Mirror
3.2

Assembly

Inserting/Replacing the Batteries:
To open the battery lid, press the latch and fold open the battery lid.
Pull out the battery compartment and insert the batteries. When inserting, pay attention to the
correct polarity according to the representation on the inside of the battery compartment.
Slide the battery compartment all the way in and close the battery lid.
The symbol will appear on the display if the charging condition of the batteries is low. When the
battery symbol is empty, you have to replace the batteries because inspections are no longer possi-
ble.
7 Magnet
8 Status bar
9 Selected lighting/brightness
10 Storage capacity
11 Selected magnification
12 Battery indicator
ENGLISH
(A)
7