NAMES OF PARTS
1. Glass shelves
2.
Cover of chiller compartment
3. Chiller compartment
4. Vegetable container cover
5. Humidity control slider
6. Vegetable container
BEFORE INSTALLING THE APPLIANCE
Before connecting your refrigerator to the power supply, check that the voltage stated on the rating label
of your appliance corresponds to the voltage in your home. A different voltage could damage the
appliance.
The plug is the only way to unplug the appliance and should therefore be accessible at all times. To turn
off main power to the appliance, turn it off and then detach the plug from the outlet.
The appliance must be grounded. The manufacturer is not responsible for damages that may occur as a
result of usage without grounding.
INSTALLATION
Install the appliance in a dry, well ventilated room. The installation location should neither be exposed to
direct sunlight nor near a heat source, e.g. a cooker, radiator, etc.
To ensure adequate ventilation for the appliance, allow a minimum of 10 cm of airspace on each side of
the cabinet.
For uneven surfaces, front feet can be aligned.
7. Levelling feet
8. Door shelves
9. Door handle
10. Door bottle shelves
11. Egg trays (2)
5
11