12. Install another ornament cover to the recession of the door. Connect the wire connectors and then
install the top cover.
13. While holding the door in the closed position, secure the upper hinge with the screws.
• Make sure the door is properly aligned on the appliance before tightening the screws.
To reverse the door handle
1. Remove the handle ③ by removing the handle covers ① and screws②.
2. Remove the screw hole covers ④ on the opposite side of the door.
3. Install the handle on the opposite side by fastening the screws and then fitting the handle covers.
4. Insert the screw hole covers to the holes on the side of the door.
TIPS FOR SAVING ENERGY
For the most energy efficient use of your appliance:
• Ensure your fridge has adequate ventilation as recommended in the installation instructions.
• Allow warm food and drinks to cool down before placing in the appliance.
• Thaw frozen food in the refrigerator and use the low temperature of the frozen food to cool
refrigerated food.
• Keep door openings to a minimum.
• Open the appliance as briefly as possible.
15