While Operating - GreenWorks 22637T Manual De Utilización

Ocultar thumbs Ver también para 22637T:
Tabla de contenido

Publicidad

EN
FR
DE
ES
The vibration level during actual use of the power tool
can differ from the declared total value depending on
the ways in which the tool is used.
It has been reported that vibrations from hand-held tools
may contribute to a condition called Raynaud's Syndrome
in certain individuals. Symptoms may include tingling,
numbness and blanching of the fingers, usually apparent
upon exposure to cold. Hereditary factors, exposure to
cold and dampness, diet, smoking and work practices
are all thought to contribute to the development of these
symptoms. It is presently unknown what, if any, vibrations
or extent of exposure may contribute to the condition.
There are measures that can be taken by the operator
to possibly reduce the effects of vibration:
Keep your body warm in cold weather. When
operating the unit wear gloves to keep the hands
and wrists warm. It is reported that cold weather is a
major factor contributing to Raynaud's Syndrome.
After each period of operation, exercise to increase
blood circulation.
Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of this
condition, immediately discontinue use and see your
physician about these symptoms.

WHILE OPERATING

Do not use trimmer without front handle in place.
Keep both hands on handles when unit is in use.
To avoid accidental starting, never carry your unit with
your finger on the trigger.
Stay alert and pay attention to what you are doing.
Use common sense when using this hedge trimmer.
Wear heavy, long pants, substantial footwear and well
fitting gloves. Do not wear short pants, sandals or
go barefoot.
Do not operate in poor lighting. Use the unit only in
daylight or good artificial light.
Do not overreach or stand on unstable support.
Keep good footing and balance at all times. Do not
use on ladder.
Do not force the hedge trimmer. It will do the job
better and with less likelihood of a risk of injury at the
rate for which it was designed.
Release the trigger, allow the motor to stop,
and remove the battery pack before performing
maintenance, repair, or making adjustments.
This hedge trimmer is to be used for cutting hedges,
bushes, and shrubs only. Do not use for any other
purpose.
IT
PT
NL
SV
DA
English (original instructions)
NO
FI
HU CS RU
Before starting the unit, make sure the cutting blades
will not come in contact with anything.
If the machine strike or become entangled with
foreign objects, stop the unit immediately, remove the
battery pack and check for damage. Do not operate
before repairing damage. Do not operate the unit with
loose or damaged parts.
Watch what you are doing. Use common sense.
Maintain hedge trimmer with care. Keep cutting edge
sharp and clean for best performance and to reduce
the risk of injury. Follow instructions for lubricating
and changing accessories. Keep handles dry, clean,
and free from oil and grease.
Check damaged parts. Before further use of the
hedge trimmer, a guard or other part that is damaged
should be carefully checked to determine that it will
operate properly and perform it's intended function.
Check for alignment of moving parts, binding of
moving parts, breakage of parts, mounting, and any
other condition that may affect it's operation. A guard
or other part that is damaged should be properly
repaired or replaced by a Authorised Service Centre
unless indicated elsewhere in this manual.
Risk of cut. Keep hands away from blades. Do not
attempt to remove cut material or hold material to
be cut when blades are moving. Make sure battery
pack is removed and the trigger is released when
clearing jammed material from blades. Do not grasp
the exposed cutting blades or cutting edges when
picking up or holding the unit.
Blades continue to move for a short time after unit is
turned off.
Keep hands, face, and feet at a safe distance from
moving parts. Do not touch or try to stop the cutting
blades when they are moving.
Always stop the motor when cutting is delayed or
when walking from one cutting location to another.
Keep unit clean of hedge clippings and other
materials. They may become lodged in the cutting
blades.
Store the unit inside in a dry place, either locked up or
up high to prevent unauthorised use or damage. Keep
out of the reach of children or untrained individuals.
Replace blade cover when unit is not in use.
Never douse or squirt the unit with water or any other
liquid. Keep handles dry, clean and free from debris.
Clean after each use, see Storage instructions.
Be sure to secure the unit while transporting.
12
RO PL
SL
HR ET
CAUTION
LT
LV
SK BG

Publicidad

Tabla de contenido
loading

Tabla de contenido