Initial Screen; Entering Password - Zyxel Prestige 100L Manual De Inicio Rápido

Tabla de contenido

Publicidad

Quick Start Manual for Prestige 100L
5 Power Up Your Prestige
When you power on your Prestige, it performs several internal tests and also does an IDSL line initialization. After
this initialization, your Prestige asks you to press the [Enter] key to continue as shown on the initial screen.
5.1

Initial Screen

Copyright (c) 1994 - 2000 ZyXEL Communications Corp.
ethernet address: 00:a0:c5:01:23:45
Resetting IDSL Firmware.(2) IDSL Firmware Rev : V 09E
...............................
Press ENTER to continue...
5.2

Entering Password

The login screen appears after you press the [Enter] key, prompting you to enter the password as shown on the next
screen. For your first login, enter the default password 1234. As you type the password, the screen displays an (X) for
each character you type. Please note that if there is no activity longer than 5 minutes after you log in, your Prestige
automatically logs you out and displays a blank screen. If you see a blank screen, press the [Enter] key to bring up the
login screen again.
6
Figure 3
Enter Password: XXXX
Figure 4
Password Screen
Initial Screen

Publicidad

Tabla de contenido
loading

Tabla de contenido