Zyxel Prestige 100L Manual De Inicio Rápido página 22

Quick Start Manual for Prestige 100L
This section describes how to configure the Ethernet-related information using Menu 3 – Ethernet Setup. From the
Main Menu, enter 3 to open Menu 3.
11 General Setup
This menu allows you to specify the filter sets you wish to implement on your Ethernet traffic. From Menu 3 –
Ethernet Setup, enter 1 to go to Menu 3.1 – General Ethernet Setup.
NOTE: You may apply up to four filter sets separated by commas.
12 Input and Output Filter Sets
Filter sets are used to block certain packets to reduce traffic and to prevent a security breach. Filtering is a very
involved subject, so leave these fields blank for the time being. After you have studied filtering in the Prestige 100L
User's Guide, come back and define the filter sets. Menu 3.2 is discussed in the next part of this Manual. Please read
on.
12
Menu 3.1 – General Ethernet Setup
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Press ENTER to Confirm or ESC to Cancel:
Figure 10 General Ethernet Setup Screen