Zyxel Prestige 100L Manual De Inicio Rápido página 23

13 TCP/IP and DHCP Ethernet Setup
From the Main Menu, enter 3 to open Menu 3 – Ethernet Setup.
To edit the TCP/IP and DHCP configuration, enter 2 to open Menu 3.2 – TCP/IP and DHCP Ethernet Setup as
shown below.
Press Space Bar to Toggle.
Figure 12
Follow the instructions in the following table on how to configure the DHCP fields.
1. General Setup
2. TCP/IP and DHCP Setup
Enter Menu Selection Number:
Figure 11 Menu 3 – Ethernet Setup Screen
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
DHCP= Server
Configuration:
Client IP Pool Starting Address= 192.168.1.33
Size of Client IP Pool= 32
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
Relay Server Address= N/A
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1
Press ENTER to Confirm or ESC to CANCEL:
Menu 3.2 – TCP/IP and DHCP Ethernet Setup Screen
Menu 3 – Ethernet Setup
Quick Start Manual for Prestige 100L
13