24. Obtain the kit supplied (1), position and align the
grille to the fascia.
25. Align the mounting tabs into their prospective
slots and push firmly on the outside of the grille to
seat. Start in one corner and work in a clockwise
motion. A loud click/snap sound is normal
when installing.
NOTE: To aid in installation, lay the fascia on its
back with its front facing up. Support with wood
blocks between the back of the fascia and the
floor/tabletop/bench in the area you are installing.
26. Look from the rear of the fascia and inspect that
all mounting tabs are seated properly.
27. Attach the brackets (2) to the grille using the
supplied screws.
28. Install the fasteners (1) securing the brackets to
the grille and fascia. Tighten the fasteners
securely.
29. Position the lower inner fascia support (2) to the
fascia.
30. If equipped, attach the adaptive cruise control
harness (1) to the lower inner fascia support (2).
1/23/2012
Page 6 of 27
2
1
1
2
1
K6861535