Colours Are Too Weak Or Too Strong; The Picture Is Cut Off Or Not Centered; The Picture Is Too Big Or Too Small; Remote Control Does Not Work - Fujitsu MYRICA VQ32-1 Instrucciones De Operación

Colours are too weak or too strong

Cause
Colour not set properly.
The connecting cable is not connected correctly.

The picture is cut off or not centered

Cause
Picture position not set properly.

The picture is too big or too small

Cause
Picture format incorrectly set.

Remote control does not work.

Cause
Batteries are flat.
There is an obstacle between the remote control
and the sensor.
The remote control is
outside its working range.
A26361-K1139-Z120-1-M119, Edition 1
MYRICA VQ32-1 / MYRICA VQ40-2
Troubleshooting
► Set the colour using the Picture menu
option.
► Connect the connecting cable correctly.
Troubleshooting
► Correct the picture position.
Use the Auto Calibration function.
Troubleshooting
► Press the FORMAT button repeatedly until
the picture gives a full screen display.
Troubleshooting
► Insert new batteries.
► Remove the obstacle between remote
control and sensor.
► Use the remote control within its working
range.
English - 51