The Displayed Picture Is Too Dark; The Picture Is Displayed, But There Is No Sound; Individual Letters Are Not Displayed (Pc Mode); Horizontal Stripes During Tv Or Video Signals - Fujitsu MYRICA VQ32-1 Instrucciones De Operación

MYRICA VQ32-1 / MYRICA VQ40-2

The displayed picture is too dark.

Cause
The picture quality has not been set correctly

The picture is displayed, but there is no sound.

Cause
Sound has been muted.
Volume set to minimum.

Individual letters are not displayed (PC mode)

Cause

Horizontal stripes during TV or video signals

Cause
Signal source placed in front of screen.
Video cable screening is not adequate.
To restore all settings to their starting condition, use the Setup – OSD – Call up factory
i
settings menu option!
52 - English
Troubleshooting
► Correct the picture brightness and contrast
using the Picture menu option.
Troubleshooting
► Press the button on the remote control.
► Increase the volume.
Troubleshooting
► Set the phase position under Setup – PC –
Phase menu option.
► Check the setting of the picture width.
► Run Setup – PC – Auto Calibration.
Troubleshooting
► Place signal sources to the side of or
behind the screen.
► Use only high-quality signal cables with
high screening attenuation.
A26361-K1139-Z120-1-M119, Edition 1