Fujitsu MYRICA VQ32-1 Instrucciones De Operación página 88

MYRICA VQ32-1 / MYRICA VQ40-2
The LCD TV must be mounted only on verticall walls.
!
The fastening material must be designed to take three times the weight of the flat panel TV.
Call in a qualified installer if required.
To refit the stand you must use only the original fastening material.
► Check before mounting that the wall can accept a weight three times that of the LCD flat panel
(for weight see chapter "Technical data"). Consult a qualified installer if in doubt.
► Make sure before installing the set that the LCD TV is switched off and mains cable and signal
cable have been disconnected.
► Two people are needed to mount the TV.
► Turn the LCD TV so that the front (flat panel) is facing down and lay it carefully on a completely
flat and secure surface.
1 = fastening screws for stand
► Loosen the 6 screws (M4 x 10) from the stand and remove the stand.
18 - English A26361-K1139-Z120-1-M119, Edition 1